Download recordings to computer

In order to provide you access to your recordings, you can either remove the microSD card or connect the BATLOGGER via USB cable to your computer.

Using the microSD card

  1. Turn the BATLOGGER off.

  2. Remove microSD card by pressing it in.

  3. Insert microSD card into your computer using a card reader

  4. Copy files

Using a USB connection, PC-Mode

  1. Turn the BATLOGGER on

  2. Plug in a USB-C cable to the BATLOGGER

  3. Plug the cable into your computer

    _images/C2_connect_PC.jpg

  4. The BATLOGGER will go into “PC-Mode” and is shown as a USB mass storage device in your File Explorer.

    _images/download_recordings_usb.png

  5. Copy files

Note

Before removing the microSD card or USB cable from the computer, always use the “Safely Remove Hardware” function to prevent memory card issues. Wait for the “Safe to Remove Hardware” message to come up and then remove your external storage device. Pulling a memory card out of its reader or removing an external drive out of the USB port could cause corrupted files, unreadable media or both.

_images/eject_c2.png